-
COVID19 UPDATE: We are currently experiencing high order volumes and deliveries may be delayed. We appreciate your patience and continued support for our business.
Tools & Testers
-
DC 6-12V to 1000 kV High Voltage Pulse Generator Inverter Super Arc Pulse Ignition High Temperature Arc Igniter Module
$27.74Add to cart- ADVANTAGE:with 6-12v high power, instant ignite cigarette & paper, can work for 20 seconds continuously, and high frequency, good quality, easy to operate and for your project.
- WIDE APPLICATION:The module can be used as high school science experiments, electronic equipment, negative ion generator, high voltage source to use when making small science.
- HIGH VOLTAGE:This module is a small production with high-pressure science inverter transformer / booster finished module , the input terminal DC 6V-12V voltage can get 1000 kV DC high voltage at the output.
- FEATURE:According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency
- NOTE: Input voltage: 6V-12V,Input Current: 2A~5A(depending on the input voltage);Output voltage: about 500~1000KV.
-
DROK Adjustable Current Voltage Analog Simulator, 0-20mA Signal Generator, DC 0-10V 4-20mA Changeable Current Source for Valve Adjusting PLC Panel LED Testing, Transmitter Output Simulation
$41.33Add to cart- AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy.
- CLEAR LED DISPLAY: Our generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display.
- AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself.
- WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter.
-
DROK LCD Display PWM Frequency Monitor Meter, 1Hz-150kHz Adjustable Duty Ratio 0-100 Percentage Square Wave Rectangular Wave Signal Generator Module
$20.99Add to cart- DROK PWM signal generator operating voltage range is DC 3.3-30V, adjustable pwm frequency range is 1Hz-150kHz, adjustable duty ratio range is 0%-100%.
- Application: it can be used as a square wave signal generator, generate square wave signal for experimental development; generate square wave signal to control the motor driver; generate adjustable pulse for MCU; generate adjustable pulse to control the relevant circuit (PWM dimming speed application etc).
- High Frequency Resolution: frequency in range 1Hz~999Hz, display resolution is 1Hz; range 1.00kHz~9.99kHz, display resolution is 0.01kHz; range 10.0kHz~99.9kHz, display resolution is 0.1kHz; range 1kHz~150kHz, display resolution is 1kHz.
- TTL Level Communication: the frequency meter is designed with single-chip TTL level communication, communication standard is 9600 bps.
- LCD Display: the blue LCD clearly displays frequency and duty ratio, PWM output can set frequency and duty ratio independently.
-
Hydraulic Pressure Gauge – SINOCMP 10Mpa/0-100Bar/0-1500PSI Economical Multi Purpose Double Scale Stainless Steel Glycerin Filled Gauge
$44.85Add to cart- GAUGE SIZE: 2.5″ (63mm) dial, 10Mpa/0-100Bar/0-1500PSI, measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar)
- Material: Stainless steel case, brass internals and connector, glycerin filled.
- USED FOR: pumps, compressors, hydraulic presses, machinery, pneumatic equipment and motors in harsh environments, where harmful vibration and pulsation are present.
- CONNECTOR SIZE: Lower mount or center back male connection with 1/8″, 1/4″, or 1/2″ NPT rate with restricted orifice.
- LONG WARRANTY: 2 year warranty for all gauges
-
JYETech 08503K miniDDS Function Generator and Servo Controller DIY Kit with Probe FG085
$100.43Add to cart- Generate continuous sine, square, triangle, ramp (up and down), and staircase (up and down) waves
- Generate user-defined arbitrary waveforms (AWG)
- Doubles as a servo controller! Generate servo test/control signals in micro-second resolution, with user programmable pulse width, amplitude, and cycle
- Can also be used as an adjustable DC voltage source by setting frequency to 0
- Trigger input and sync output on-board
-
Pulse Generator, DROK PWM Function Generator DC 3.3-30V 1-150kHZ 1-9999 Dual Mode, Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case
$39.98Add to cart- PARAMETER — working voltage DC 3.3-30V; frequency range 1Hz-150kHz; duty ratio range 0-100%; number of pulse 1-9999 or infinite; delay output time 0.000s-9999s.
- DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode.
- APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver; for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc.
- PROTECTION — with anti-reverse protection, 5.08mm terminal wiring.
- EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF.
-
Signal Generator DIY Kit, KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency
$20.97Read more- 【3 kinds of waveforms】◕‿◕High resolution, can generate sine/triangle/square waveforms.
- 【Adjustable frequency & amplitude】◕‿◕Frequency range: 1Hz-1MHz. Adjustable frequency and amplitude.
- 【Coarse tuning & fine tuning】◕‿◕Frequency adjustment features coarse tuning and fine tuning.All are through hole components, easy for installation.
- 【Power supply】◕‿◕Wide power supply range, use 9-12V external power or 9V battery(NOT Included).
- ◕‿◕This is a DIY kit with All are through hole components,easily assemble the Function Generator by yourself.
-
Signal Generator, KK moon DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth/ECG/Noise Output 1Hz~65534Hz Frequency Amplitude
$53.99Add to cart- LCD display to indicate the data accurately.
- Can output sine/triangle/square/forward and reverse sawtooth/ECG/Noise waveforms.
- DDS Frequency Range: 1Hz~65534Hz.
- Can section into the value: 1, 10, 100, 1000, 10000Hz.
- DDS signal amplitude of the offset amount can be adjusted separately by two potentiometers.
-
Signal Generator, KKmoon High Precise Adjustable Current Voltage Analog Simulator 0-10V 4-20mA Signal Generator Sources
$80.00Read more- Internal reverse and overcurrent protection, 30V protection voltage.
- Built-in one single 3.7V lithium battery power supply; the using time varies, based on the usage (It can be more than 6 hours with 20mA continuous output).
- With internal battery voltage hint, (UV light)when the undervoltage light is on, please turn off the charging.
- Do not use for a long time, please charge once every two months.
- Charge through micro USB cable.
-
Sperry Instruments VD6509 Adjustable Non-Contact Detector with Flashlight, cETLus Listed, Lifetime Warranty, 1, 5 Clams/Master Voltage Tester, Yellow
$41.99Add to cart- Built-in Flashlight
- Sensitivity adjustments in multiple-wire applications
- Adjustable non-contact sensitivity detects voltage from 12-1000v AC
- Audible and 360 visual indication